COLDMARK

Coldmark How it works - Product specifications
Usage instructions - Product applications.
A Freeze Indicator To Monitor Damaging Cold Temperatures

Projects One ColdMark Freeze Indicators put you in control even after your product has been shippedat a glance if the . With ColdMark, your customer will know product has been exposed to damaging or extreme temperatures during shipping or storage. The ColdMark indicator accurately shows if your product has been exposed to cold below as its colorless indicator 32°F/0°C bulb turns to an irreversible violet color as temperatures rise above the indicatorresponse temperature. (Other response temperatures are also 's available.)

Importantly, ColdMark is guaranteed to work within plus or minus 1 degree of this response temperature, the highest level of accuracy available in the industry. ColdMark Freeze Indicators are a strategic, value-added plus for your product, providing a permanent record that assures your customers of consistent quality.

HOW THE COLDMARK WORKS

The ColdMark Indicator tube and build contain a specially formulated colorless fluid, a violet-colored fluid, and a green-colored fluid separating the two.

When the indicator is exposed to a temperature at or below the response temperature for approximately 30 minutes, the colorless bulb fluid solidifies and contracts. This draws the colored liquids into the bulb and the bulb changes from clear and colorless to cloudy with streaks of violet. When the indicator is warmed to above the response temperature again, the bulb changes irreversibly to a uniform violet.

COLDMARK SPECIFICATIONS

Product Sizes:3 1/4" long x 3/4"wide and 3/8 " high

Temperature Range: Available in response temperatures from 32° F/0°C and 26°F/-3°C

Characteristics: Irreversible and tamperproof

Must be stored above response temperature and not exposed to temperatures exceeding 110°F/43°C

USING THE COLDMARK

Application is simple.

ColdMark's construction makes it fast and simple to add the benefits of temperature monitoring to your product.

Simply peel the release liner off the back of the indicator and adhere the pressure-sensitive adhesive backing to a dry surface. You can place the indicator on the exterior or the interior of a shipping container. (ColdMark Indicators should not be placed where the are exposed to crushing pressure.)

COLDMARK APPLICATIONS

Real-world application examples.

Pharmaceuticals and blood products

Food products

Adhesives

Photographic and film products