Cold Rolled Carbon Steel for automotive use

Specification	Chemical Composition (% Maximum)					Value		Max Hardness Rb	Min Yield point Mpa	Min Tensile Mpa	Min Elongation % (2")	Description and typical applications
Specification	C	Mn	P	S	Al Mín.	r	n	Max Hardness Rb	Min Yield point Mpa	Min Tensile Mpa	Min Elongation % (2")	Description and typical applications
ASTM A-366	0.020 - 0.15	0.60	0.030	0.035	-	-	-	60	-	-	-	Commercial forautomotive parts that do not require high drawnability.
ASTM A-619-97 (1)	0.10	0.50	0.020	0.030		1.0 - 1.5	0.17 - 0.21	55	172 - 275	-	32 ⁽¹⁾	Deep drawing for carriage exterior parts.
ASTM A-620 (1)	0.08	0.50	0.020	0.030	0.01	1.3 - 1.7	0.17 - 0.22	50	151 - 241⁽¹⁾	-	36⁽¹⁾	Extra deep drawing for carriage exterior parts.
ASTM A-1008 CS⁽¹⁾	0.02 - 0.15	0.60	0.030	0.035	-	-	-	-	-	-	^-	Commercial for automotive parts that do not require high drawnability.
ASTM A-1008 DS⁽¹⁾	0.02 - 0.08	0.50	0.020	0.030	0.02	1.30 - 1.70	0.17 - 0.22	-	^{150 - 240}	-	36	Commercial for automotive parts that do not require high drawnability.
EN 10130 FeP01	0.12	0.60	0.045	0.045	-	-	-	-	140 - 280	270 - 410	28 (80 mm)	Commercial for automotive parts that do not require high drawnability.
EN 10130 FeP03	0.10	0.45	0.035	0.035	-	1.3	-	-	140 - 240	270 - 370	34 (80 mm)	Deep drawing for carriage exterior parts.
EN 10130 FeP04	0.08	0.40	0.030	0.030	-	1.6	0.18	-	140 - 210	270 - 350	38 (80 mm)	Extra deep drawing for carriage exterior parts.
JIS G 3141 SPCC	0.12	0.50	0.040	0.045	-	-	-	60	-	270 mín	34⁽²⁾	Commercial for automotive parts that do not require high drawnability.
JIS G 3141 SPCD	0.10	0.45	0.035	0.035	-	-	-	55	-	270 mín	36⁽²⁾	Deep drawing for carriage exterior parts.
JIS G 3141 SPCE	0.08	0.40	0.030	0.030	-	-	-	50	-	270 mín	³⁸⁽²⁾	Extra deep drawing for carriage exterior parts.

(1) The values of the typical mechanical properties indicated, are not mandatory.
(2) Depends on thickness, beaker JIS 5.