| DIN |
German Standards Institute |
| |
|
| |
Burggrafenstrasse
6 |
| |
D-10787 Berlin |
| |
Germany |
| |
Tel (49) 30 26 01 0 |
Fax (49) 30 26 01 12 31 ;
(49) 30 26 |
| |
28 125
(Information dept.) |
| |
Web site:
www.din.de |
| |
|
| |
|
| 1263 |
Lead waste pipes and
bends for drainage systems |
| 1615 |
Welded circular
unalloyed steel tubes not subject to special requirement - technical
delivery conditions |
| 1626 |
Welded circular
unalloyed steel tubes subject to special requirements - technical delivery
conditions |
| 1628 |
High performance
welded circular unalloyed steel tubes - technical delivery conditions |
| 1629 |
Seamless circular
unalloyed steel tubes subject to special requirements - technical delivery
conditions |
| 1630 |
High performance
seamless circular unalloyed steel tubes - technical delivery conditions |
| 1651 |
Free cutting steels
- technical conditions of delivery |
| 1754 - 1 |
Copper tubes -
seamless drawn, dimension ranges and coordination of tolerances |
| 1754 - 2 |
Copper tubes -
seamless drawn, preferred dimensions for general purposes |
| 1754 - 3 |
Copper tubes -
seamless, preferred dimensions for pipelines |
| 1755 - 1 |
Copper wrought alloy
tubes - seamless drawn - dimension ranges and coordination of tolerances |
| 1755 - 2 |
Copper wrought alloy
tubes drawn - preferred dimensions for general purposes |
| 1755 - 3 |
Copper wrought alloy
tubes, seamless drawn - preferred dimensions for pipelines |
| 1785 |
Wrought copper and
copper alloy tubes for condensers and heat axchangers |
| 2391 |
Steel seamless
precision tubes |
| 2391 - 1/2 |
Seamless precision
steel tubes |
| 2393 - 1/2 |
Welded precision
steel tubes |
| 2394 - 1/2 |
Welded and sized
precision steel tubes |
| 2395 - 1/2/3 |
Rectangular and
square welded precision steel tube or hollow sections |
| 2395 - 1 |
Rectangular and
square welded steel hollow sections - dimensions |
| 2395 - 2 |
Rectangular and
square welded precision steel tube - technical terms of delivery for general
use |
| 2395 - 3 |
Rectangular and
square electric-welded precision steel tubes - dimensions and technical
conditions of |
| |
delivery for tubes
to be used in motor vehicle construction |
| 2410 - 1 |
Tubes - general
review of standards for steel tubes |
| 2413 - 1/2 |
Design of steel
pressure pipes |
| 2440 |
Steel tubes
medium-weight suitable for screwing |
| 2441 |
Steel tubes
heavy-weight suitable for screwing |
| 2442 |
Steel tubes of
specified quality suitable for screwing; nominal pressure 1 to 100 |
| 2444 |
Zinc coating on
steel tubes, quality standard for hot dip galvanizing of steel tubes for
installation purposes |
| 2445 - 1/2 |
Seamless steel tubes
for dynamic loads |
| 2445 - 1 |
Seamless steel tubes
for dynamic loads - hot finished tubes, nominal pressure 100 to 400 |
| 2445 - 2 |
Seamless steel tubes
for dynamic loads - cold drawn tubes, nominal pressures 64 to 400 |
| 2448 |
Seamless steel pipes
and tubes - dimensions, conventional masses per unit length |
| 2449 |
Seamless steel tubes
in ST 00, dimensions and range of application |
| 2458 |
Welded steel pipes
and tubes, dimensions, conventional masses per unit length |
| 2460 |
Steel water pipes |
| 2470 - 1/2 |
Steel gas pipelines
- Part 1 : for permissible working pressures up to 16 bar - pipes and
fittings - Part 2 : for |
| |
permissible working
pressures exceeding 16 bar - requirements for pipeline components |
| 2470 - 1 |
Steel gas pipelines
for permissible working pressures up to 16 bar - pipes and fittings |
| 2559 |
Edge preparation
for welding - weld preparation inside diameter of steel pipes |
| 2614 |
Cement mortar
linings for ductile iron and steel pipes and fittings - application,
requirements and testing |
| 2916 |
Bending radi for
seamless and welded steel tubes - design sheet |
| 2917 |
Seamless steel
tubes for superheated steam pipelines and headers |
| 2999-1/6 |
Pipe threads for
tubes and fittings |
| 4427 |
Steel tubes for
falsework and working scaffolds - requirements, tests (german version) |
| 4922 - 1 |
Steel filter pipes
for drilled wells with slot perforation and fisching (butt strap joint) |
| 4922 - 2 |
Steel filter pipes
for drilled wells with screwed connection DN 100 to DN 500 |
| 4922 - 3 |
Steel filter pipes
for drilled wells - flanged connection, NW 500 to NW 1000 (Nominal Diameter
500 to 1000) |
| 4927 |
DN 50 to DN 200
steel flanged well tubing |
| 4930 |
Pipes for use in
freezing shaft sinking - dimensions and technical delivery conditions |
| 8563 |
Quality assurance
in welding operations |
| 11850 |
Stainless steel
tubes for the food industry, dimensions, materials |
| 14462 - 1/2 |
Water conduit for
fire extinguishing |
| 14462 - 1 |
Water conduit for
fire extinguishing - definition of terms, diagrammatic views |
| 14462 - 2 |
Water conduit for
fire extinguishing - dry rising mains, PN 16, wired permanently in buildings |
| 17118 |
Cold rolled steel
sections - technical conditions of delivery |
| 17121 |
Seamless circular
steel tubes for structural steel work - technical delivery conditions |
| 17124 |
Seamless circular
fine grain steel tubes for structural steel work - technical delivery
conditions |
| 17173 |
Seamless circular
tubes made from steels with low temperature toughness - technical delivery
conditions |
| 17174 |
Welded circular
tubes made from steel with low temperature toughness - technical delivery
conditions |
| 17175 |
Seamless tubes of
heat-resistant steels - technical conditions of delivery |
| 17176 |
Seamless circular
steel tubes for hydrogen service at elevated temperatures and pressures -
technical |
| |
delivery conditions |
| 17177 |
Electric
pressure-welded steel tubes for elevated temperatures - technical conditions
of delivery |
| 17178 |
Welded circular
fine grain steel tubes subject to special requirements - technical delivery
conditions |
| 17179 |
Seamless circular
fine grain steel tubes subject to special requirements - technical delivery
conditions |
| 17204 |
Seamless circular
tubes made from steels for quenching and tempering - technical delivery
conditions |
| 17455 |
General purpose
welded circular stainless steel tubes - technical delivery conditions |
| 17456 |
General purpose
seamless circular stainless steel tubes - technical delivery conditions |
| 17457 |
Welded circular
austenitic stainless steel tubes subject to special requirements - technical
delivery conditions |
| 17458 |
Seamless circular
austenitic stainless steel tubes subject to special requirements - technical
delivery |
| |
conditions |
| 17459 |
Seamless circular
high-temperature austenitic steel tubes - technical delivery conditions |
| 17671 - 2 |
Tubes of copper and
wrought copper alloys - technical conditions of delivery |
| 17679 |
Wrought copper and
copper alloy tubes with rolled fins for use in heat exchangers |
| 17751 |
Nickel and nickel
alloy tubes - special properties |
| 17861 |
Seamless circular
titanium and titanium alloy tubes |
| 19522 - 1 |
Cas iron spigot (SML)
drainpipes and fittings - dimensions |
| 19522 - 2 |
Cas iron spigot (SML)
drainpipes and fittings - technical delivery conditions |
| 19530 - 1 |
Steel socket pipes
and fittings for sewers - dimensions |
| 19530 - 2 |
Steel socket pipes
and fittings for sewers - technical delivery conditions |
| 28179 |
Steel U-tubes for
tubular heat exchangers - technical delivery conditions |
| 28180 |
Seamless
steel tubes
for tubular heat exchangers - dimensions, dimensional deviations and
materials |
| 28181 |
Welded
steel tubes for tubular heat exchangers - dimensions, dimensional deviations
and materials |
| 28500 |
Cast iron pressure
pipes and special casting - technical conditions of delivery |
| 30670 |
Polyethylene
coatings of steel pipes and fittings - requirements and testing |
| 30671 |
Thermoset plastic
coatings for buried steel pipes |
| 30672 |
Coatings of
corrosion protection tapes & heat shrinkable material for underground
pipelines |
| 30672 - 1 |
Coatings of
corrosion protection tapes and heat shrinkable material for pipeline for
operational temperatures |
| |
up to 50°C |
| 30673 |
Bitument coatings &
linings for steel pipes, fittings & vessels |
| 30674 - 1 |
Coating of ductile
cast iron pipes - polyethylene coating |
| 30674 - 2 |
Cement mortar
coating for ductile iron pipes - requirements and testing |
| 30674 - 3 |
Coating of ductile
cast iron pipes - zinc coating with protective covering |
| 30674 - 4 |
Coating of ductile
cast iron pipes - bitumen coating |
| 30674 - 5 |
External protection
of ductile cast iron pipes - polyethylene sleeving |
| 30678 |
Polypropylene
coatings for steel pipes |
| 40020 |
Conduit for
electrical wiring, screwed steel conduit, plain conduit, couplers |
| 40430 |
Steel conduit thread
- dimensions |
| 54141 - 1 |
Non destructive
testing - eddy current testing of pipes and tubes - general remarks on
testing using |
| |
concentric test
coils and the single-frequency method |
| 54141 - 2 |
Non-destructive
testing - eddy current testing of pipes and tubes - reference method for the
determination |
| |
and calibration of
the properties of an eddy current testing system using concentric test coils |
| 54141 - 3 |
Non-destructive
testing - eddy current testing of pipes and tubes - procedure |
| 59370 |
Steel sections -
bright square edge angles - dimensions, permissible deviations, weights |
| 59413 |
Cold rolled steel
sections - permissible variations on dimensions, form and weight |
| 59755 |
Nickel and nickel
alloy tubes - dimensions |
| |
|