Extra table for galvanized steel sheet Except USA, Canada & P R China Thickness Extra

Thickness (Before coating)  MM
Standard
zinc
coating

Comparative Table of Gauges

Extra Price  US$/MT
NORMAL RANGE   USG BWG BG
SGCC
SGCH
 SGHC
over 3.2 3.201 Z27 -10 -10 -9 * NEGO
2.3 - 3.2 2.300 - 3.200 Z27 11- 13 11-13 10 -12 NEGO -4
2.0 - 2.2 2.000 - 2.299 Z27   14 13 17 -4
             
1.6 - 1.9 1.600 -1.999 Z27 14, 15 15 , 16 14, 15 5 0
1.1 - 1.5 1.001 - 1.599 Z27 16 - 19 17 - 19 16 - 19 0 *
1.00 0.951 - 1.000 Z22 20   20 BASE *
             
0.90 0.851-0.950 Z22 21 20 21 17 *
0.80 0.751-0.850 Z22 22 21 22 24 *
0.70 0.651-0.750 Z22 23 22 23 33 *
             
0.60 0.576-0.650 Z22 24 23 24 45 *
0.55 0.526-0.575 Z22 25 24 25 58 *
0.50 0.476-0.525 Z18 25 25 26 71 *
             
0.45 0.426-0.475 Z18 27 26 27 84 *
0.40 0.376-0.425 Z18 28 27 28 104 *
0.35 0.326-0.375 Z18 29 28,29 29 124 *
             
0.30 0.286-0.325 Z18 30 30 30 144 *
0.27 0.261-0.285 Z18, Z12 31   31 152 *
0.25 0.241-0.260 Z12 32 31 32 163 *
             
0.23 0.216-0.240 Z12 33 , 34 32 33 175 *
0.20 0.196-0.215 Z12 35 33 34 167 *
0.19 0.186-0.195 Z12       199 *
             
0.18 0.176-0.185 Z12 36 34   211 *
0.17 0.166-0.175 Z12 37   35 223 *
             
0.16 0.156-0.165 Z12 38     235 *
0.15 0.146-0.155 Z12 39   36 259 *
             
0.14 0.136-0.145 Z12 40   37 295 *
0.13 0.126-0.135 Z12 41, 42 35   343 *
             
0.12 0116-0.125 Z12 43   38 391 *
0.11 0.115 Z12     39 439 *

2/ SPECIAL COATING EXTRA Z27

THICKNESS BEFORE COATING MM

 EXTRA
NORMAL RANGE SGOC
1.00 0.951~1.000 10
0.90 0.851~0.950 12
0.80 0.751~0.850 14
0.70 0.651~0.750 16
0.60 0.576~0.650 19
0.55 0.526~0.575 19
0.50 0.476~0.525 38
0.45 0.426~0.475 40
0.40 0.376~0.425 45
0.35 0.326~0.375 50
0.30 0.286~0.325 57

Z35 &Z45

THICKNESS BEFORE COATING MM

EXTRA
NORMAL RANGE Z35 Z45
1.1~1.5 OVER 1.000 15 28
1.00 0.942~1.000 26 45
0.90 0.847~0.941 29 50
0.80 0.747~0.846 33 57
0.70(a) 0.647~0.746 36 64
0.70(B) 0.622~0.646 40 70
0.60 0.572~0.621 43 74
0.55 0.522~0.571 45 78
0.50 0.472~0.521 66 102
0.45 0.413~0.471 71 109
0.40 0.372~0.412 78 121
0.35 0.322~0.371 88 135

3/ WIDTH

WIDTH

 EXTRA
MM inch feet US$/MT
610-761 24.0-29.9 2.00-2.49 30
762-913 30.0-35.9 2.50-2.99 15
914-1219 36.0-48.0 3.00-4.00 BASE
1220-1250 48.1-49.2 4.01-4.10 10
1251-1524 49.3-60.0 4.11-5.00 15
1525-1329 60.1-72.0 5.01-6.00 35

4/ CUT TO LENGTH EXTRA 

LENGTH EXTRA
MM inch feet US$/MT
1219-1828 48.0-71.9 4.0-5.9 55
1829-3048 72.0-120.0 5.0-10.0 50
3049-3858 120.1-144.0 10.1-12.0 55
3858- 144.1 12.1 60

5/ PACKING EXTRA (GROSS MAX)

PKG WEIGHT EXTRA US$/MT
SHEET
3MT & OVER
2MT -3MT
2MT UNDER
0
5
NEGO
COIL
3MT & OVER
3MTUNDER
O
NEGO

QUALITY EXTRA (PER SIZE / SHIPMENT)

QUANTITY EXTRA US$/MT
10MT OVER 0
10MT UNDER 10

SLITTING EXTRA

WIDTH m/m THICKNESS m/m EXTRA
100 AND OVER 0.5 AND OVER 75
OTHER NEGO

REMARKS

IN CASE OF THE OTHER OF THE TOTAL COATED THICKNESS THE ABOVE EXTRAS SHALL APPLY TO THE THEORETICAL THICKNESS OF THE BASE SHEET OBTAINED AFTER SUBTRACTING THE ZINC COATING THICKNESS FORM THE TOTAL COATED THICKNESS

ZINC COATING THICKNESS MM
Z12 0.025
Z18 0.034
Z22 0.043
Z27 0.054
Z35 0.064
Z45 0.08

 

 

If you are no member yet, please fill registration form
(basic fee AED 1000/- or USD 275/- year only)
MEsteel.com, contact address : P.O.Box 57040, Dubai, United Arab Emirates,  info@mesteel.com , Tel:+971-4-3494995 Fax:+971-4-3494997

 
 
Copyright © 2000 mesteel.com. All rights reserved. Read Our Disclaimer